A mooring, equipped with a CTD sensor (SBE37) at 350 m depth, was deployed in the Yermak Pass on the 24 September 2017 from the R/V Lance. The mooring was recovered in summer 2020 from K/V Svalbard. The present dataset provides 10-day smoothed time series of daily conservative temperature (CT, °C), absolute salinity (SA, g/kg) and pressure (db) recorded by the SBE37 sensor, from the 24 September 2017 to the 31 May 2020. The mooring was located at 80.63°N, 6.88°E. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

Memorial University has over the past 15 years been involved in various ocean glider activities with deployments focused primarily on the Newfoundland Shelf and the Labrador Sea. For example, there are four deployments with glider data in the Labrador Sea. Partnerships with Fisheries and Oceans Canada and Ocean Gliders Canada have also resulted in deployments of Memorial's gliders in the Pacific. The data contain 14’663 mission kms, 620 deployment days and 25’108 individual glider profiles. L1 NETCDF files for every deployment archived on the Memorial University’s Glider Data server are made available publicly for scientific research. Deployments vary in duration and region. All files were processed with the SOCIB glider toolbox ((Troupin et al., 2015)-[https://doi.org/10.1016/j.mio.2016.01.001]), modified by Nicolai von Oppeln-Bronikowski, 2019 for MUN glider deployments. Metadata: File creator(s), contact info, institution, applicable funding, responsible researcher(s), deployment region, deployment start, deployment end, longitude min, longitude max, latitude min, latitude max, glider type, glider configuration if known, sensors, sensor serial numbers, science data QC. Glider Data: Minimum Data: Time, Depth, Position, Depth-Averaged Current, CTD. Most Deployments: Oxy_umolL, Oxy_Calphase_DEG, Oxy_sat Some Deployments: pCO2_uatm,  pCO2_Calphase_DEG, pCO2_Dphase Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

The East Sea Real-time Ocean Buoy (ESROB) is a surface mooring that has been in operation off the mid-east coast of Korea since 1999. The ESROB is 9 km off the coast (37° 32.24’N; 129° 12.92’E) in a water depth of 130 m, and provides meteorological and oceanographic (physical and biogeochemical) data every 10 min from Conductivity-Temperature-Depth (CTD) and acoustic Doppler current profiler (ADCP) instruments. The data provided here were collected between 2016 and 2020 and follow the data collected by previous publications. The data were quality controlled and assured using typical data processing methods, and have been used to address temporal variations in currents and water properties, as well as wind-and tide-induced internal waves. The uploaded data files contain variables in a NetCDF format that were obtained during each deployment. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains real-time total dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired from the EMSO-Azores seafloor observatory from September 2013 to February 2014 (n=332). Data are purchased by the CHEMINI Fe (CF1), a CHEmical MINIaturized analyser dedicated to in situ determination of iron concentrations (every 24 hours, with in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The instrument is deployed on TEMPO part of Seamon East environmental monitoring node. The sample inlet is located on a mussel bed at the base of the Eiffel Edifice at 1695m depth. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between September 2016 and February 2017 (n=332) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 24 hours, with daily in situ calibration using a 25 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF1) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between July 2017 and March 2018 (n=168) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

In April 2017, two Ice Atmosphere Arctic Ocean Observing System platforms (IAOOS 23 and IAOOS 24) were deployed near the North Pole. Over the next 8 months, they meandered southwards with the ice in the Transpolar Drift, collecting measurements in the upper 250 m of Amundsen Basin, Nansen Basin and Fram Strait. The ocean profilers are PROVOR SPI (from French manufacturer NKE), which includes a Seabird SBE41 CTD (Conductivity, Temperature, Depth) and a dissolved oxygen (DO) Aandera 4330 optode. IAOOS 23 also featured a bio-optics sensor suite and a submersible ultraviolet nitrate analyzer (SUNA, Satlantic-Seabird Inc.). The bio-optics sensor suite (called Pack Rem A) combines a three-optical-sensor instrument (ECO Triplet, WET Labs Inc.) and a multispectral radiometer (OCR-504, Satlantic Inc.). The present dataset is composed of chlorophyll-a fluorescence, backscatter, irradiances (at 412, 490 and 555 nm), photosynthetically active radiation (PAR), nitrate and colored-dissolved organic matter data from the IAOOS 23 platform, as well as composites of absolute salinity, conservative temperature and apparent oxygen utilization data from both profilers. The profilers were set to perform two upward profiles a day from 250 m starting at approximately 6 am and 6 pm. In this dataset, chlorophyll-a, PAR and irradiances were corrected with a shift to set dark values to zero. Nitrate was interpolated vertically every 5 m, and all other parameters were interpolated vertically every 0.5 m. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains temperature (°C) and dissolved oxygen concentrations (µmol/l) acquired between April 2015 and September 2016 using an Aanderaa optode (model 3830, sensor head # 1180-520, salinity setting 3.5%, uncorrected for pressure) The sensor. The sensor was positioned on a mussel bed at the base of the Tour Eiffel edifice (1695m depth). Data was acquired every 15 minutes. A two-point calibration at 0% and 100% saturation levels is performed at each maintenance cruise. The optode connected to the TEMPO ecological module is part of the SeaMoN East monitoring node. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired between August 2018 and December 2018 (n=445) using the CHEMINI Fe, a CHEmical MINIaturized analyser (samples taken every 12 hours, with daily in situ calibration using a 20 µmol/l iron standard, Vuillemin et al., 2009). The sample inlet was positioned on the mussel bed at the base of the Tour Eiffel edifice of the Lucky Strike hydrothermal vent (1695 depth).CHEMINI Fe (CF2) was mounted on the TEMPO module which was itself connected to the SeaMON East node of the EMSO-Azores observatory. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

This dataset contains real-time total dissolved iron concentrations ((Fe(II) + Fe(III); µmol/l) acquired from the EMSO-Azores seafloor observatory TEMPO from July 2011 to March 2012 (n=1780). Data are purchased by the CHEMINI Fe (CF0), a CHEmical MINIaturized analyser dedicated to in situ determination of iron concentrations (every 12 hours, without in situ calibration, Vuillemin et al., 2009). The instrument is deployed on TEMPO part of Seamon East environmental monitoring node. The sample inlet is located on a mussel bed at the base of the Eiffel Edifice at 1695m depth. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.